DMX Show Controller

d4a438_46aebb3ef6c04457bf9a840015fb6f33_mv2_d_1685_1536_s_2.png
d4a438_46aebb3ef6c04457bf9a840015fb6f33_mv2_d_1685_1536_s_2.png

DMX Show Controller

99.00

The DMX Show Controller is an incredibly compact and easy to use solution to add lighting effects to any 3-channel DMX controlled lighting fixtures. The DMX Show Controller includes 9 pre-programmed modes of operation to control your DMX lighting, each mode can be further customized using the two "option" dials. Additionally, the DMX Show Controller includes 5 "Sound Sync" modes which will control your DMX lighting based on your music. 

The DMX Show Controller will output up to 24 channels total, which is (8) 3-channel DMX lighting fixtures. The number of fixtures that can be assigned to each light is unlimited. The DMX Show Controller is powered by 12v DC, and with it's compact design is a perfect fit for any DMX show control environment.

Quantity:
Add To Cart

Normal Operation - Normal Mode 1-9

Normal Mode 1 Option 1 Option 2

Random Color & Time Switching

Channels will randomly change colors at random times

CCW - Each channel will switch between random colors individually

CW - All channels will switch between random colors simultaneously

CCW - Speed up, color change

CW - Slow down, color

Normal Mode 2 Option 1 Option 2

Random Color Double Ping Pong

Channel 1 and 8 will load a random color. Channel one color will travel through each channel until it reaches channel 8. Simultaneously, channel 8 color will travel backward through each channel until it reaches channel

  1. New random colors will load and will “ping pong” back and forth.

CCW - N/A

CW - N/A

CCW - Speed up, ping pong effect

CW - Slow down, ping pong effect

Normal Mode 3 Option 1 Option 2
Random Color Single Ping Pong

Channel 1 will load a random color. Channel one color will travel through each channel until it reaches channel 8.
Channel 8 color will load new color and travel backward through each channel until it reaches channel 1. New random color will load and will “ping pong” back and forth.

CCW - Only one channel will be on at one time

CW - All channels will be turned on

CCW - Speed up, ping pong effect

CW - Slow down, ping pong effect

Normal Mode 4 Option 1 Option 2

Candle Flicker

All channels will flicker with a candle effect.

CCW - N/A

CW - N/A

CCW - N/A

CW - N/A

Normal Mode 5 Option 1 Option 2

Random Strobe Effect

All channels will load a color at a dim level. Random channel will brightly strobe that color.

CCW - Change color through spectrum

CW - Change color through spectrum

CCW - Speed up, strobe effect

CW - Slow down, strobe effect

Normal Mode 6 Option 1 Option 2

Random Color Fire Fly

One random channel will fade in and out with a random color.

CCW - Speed up, rate of fade

CW - Slow down, rate of fade

CCW - Speed up, channel change

CW - Slow down, channel change

Normal Mode 7 Option 1 Option 2

Individual Channel Rainbow Effect

All channels will fade smoothly through the color spectrum from one channel to the next.
(Each channel different color)

CCW - N/A

CW - N/A

CCW - Speed up, rainbow effect

CW - Slow down, rainbow effect

Normal Mode 8 Option 1 Option 2

Simultaneous Channel Rainbow Effect

All channels will fade smoothly through the color spectrum simultaneously.
(All channels same color)

CCW - N/A

CW - N/A

CCW - Speed up, rainbow effect

CW - Slow down, rainbow effect

Normal Mode 9 Option 1 Option 2

Random Color Chase Effect

Random color will load and chase through all channels. New random color will load after each cycle.

CCW - One channel  ON at a time  

CW - One channel OFF at a time

CCW - Speed up, chase effect

CW - Slow down, chase effect


Sound Sync Operations

Sound Sync Mode 1 Option 1 Option 2

Color Organ
• Channel 1 and 5 (Red) - Low Frequency Level
• Channel 2 and 6 (Green) - Low-Mid Frequency Level
• Channel 3 and 7 (Blue) - Mid Frequency Level
• Channel 4 and 8 (Yellow) - High Frequency Level

CCW - N/A

CW - N/A

CCW - N/A

CW - N/A

Sound Sync Mode 2 Option 1 Option 2

Color U.V. Meter
Channels 1 to 8 will respond to sound as a U.V. meter.
Channel 1 represents lower volume, while channel 8 represents highest volume level. Colors on all channels will also change in reponse to volume level.

CCW - Lower sensitivity to input volume level

CW - Increase sensitivity to input volume level

CCW - N/A

CW - N/A
Sound Sync Mode 3 Option 1 Option 2

Color Change To The Beat
Channel color will change in response to the beat of the sound on the input.
Note: this mode has 3 options.

CCW - Each channel will change color based on the beat

MIDDLE - All channels will change color to the beat 

CW - Strobe random colors to the beat

CCW - N/A

CW - N/A

Sound Sync Mode 4 Option 1 Option 2

Chasing Sound Level to

Color
Channel 1 will load a color and brightness based on the input level and will chase that color through to

Channel 8.

  • Very quick response.

CCW - N/A

CW - N/A

CCW - N/A

CW - N/A

Sound Sync Mode 5 Option 1 Option 2

Strobe Effects To The Beat
Strobe effects based on the beat of the sound on the input. All channels will produce a white strobe lighting effect.

  • Note: this mode has 3 options 
  • Warning: It is imperative that you make viewers aware of the potential dangers associated with stoboscopic effects.

CCW - Random channel flashing strobe effect based on the beat

MIDDLE - All channel strobe wave randomly back and forth between Channel 1 and 8 based on beat

CW - Individual channel strobe wave randomly back and forth between Channel 1 and 8 based on beat

CCW - Increase speed of strobe channel  change

Option 1 Middle and CW only

CW - Decrease speed of strobe channel change

Option 1 Middle and CW only